ports/lang/python/3/python.port.mk

#	python.port.mk - This file is in the public domain.
#	Xavier Santolaria <xavier@santolaria.net>
#	Stuart Henderson <stu@spacehopper.org>

CATEGORIES +=		lang/python

# If switching to a new MODPY_DEFAULT_VERSION_3, say 3.x to 3.y:
# - All ports with PLISTs that depend on the Python version number
# must be REVISION-bumped.
# - Keep xenocara/share/mk/bsd.xorg.mk PYTHON_VERSION in sync.

# needs gcc > 4 for atomic instructions 
COMPILER ?=		base-clang ports-gcc
COMPILER_LANGS ?=	c

MODPY_WANTLIB =		python${MODPY_VERSION}
MODPY_RUN_DEPENDS =	lang/python/3
MODPY_LIB_DEPENDS =	lang/python/3
_MODPY_BUILD_DEPENDS =	lang/python/3
MODPY_TKINTER_DEPENDS =	lang/python/3,-tkinter

MODPY_MAJOR_VERSION =	${MODPY_VERSION:R}

# replace py- prefix with py3-
FULLPKGNAME ?=	${PKGNAME:S/^py-/py3-/}${FLAVOR_EXT}
MODPY_PY_PREFIX =	py3-
MODPY_PYCACHE =		__pycache__/
MODPY_MAJORMINOR =	${MODPY_VERSION:C/\.//g}
MODPY_PYC_MAGIC_TAG =	cpython-${MODPY_MAJORMINOR}.
MODPY_ABI3SO =		.abi3
MODPY_PYOEXTENSION ?=	opt-1.pyc

MODPY_PYBUILD ?=	No
MODPY_PI ?=
.if defined(MODPY_BUILD_DIR)
_MODPY_ADD_TARGETS =	No
.else
_MODPY_ADD_TARGETS =	Yes
.endif
MODPY_BUILD_DIR ?=	${WRKSRC}

MODPY_SETUPTOOLS ?=	default
.if ${MODPY_SETUPTOOLS} != default
ERRORS += "Fatal: MODPY_SETUPTOOLS is only for python 2 ports."
.endif

# If MODPY_PYTEST_ARGS are set, or if using MODPY_PYBUILD, it implies that
# we want MODPY_PYTEST = Yes
MODPY_PYTEST_ARGS ?=
.if empty(MODPY_PYTEST_ARGS) && ${MODPY_PYBUILD} == No
MODPY_PYTEST ?=		No
.else
MODPY_PYTEST ?=		Yes
.endif

.if ${MODPY_PYTEST:L} == "yes"
MODPY_TEST_DEPENDS =	${RUN_DEPENDS}
MODPY_TEST_DEPENDS +=	devel/py-test
.else
MODPY_TEST_DEPENDS =	${MODPY_RUN_DEPENDS}
.endif

.if ${NO_BUILD:L} == "no"
MODPY_BUILDDEP ?=	Yes
.else
MODPY_BUILDDEP ?=	No
.endif
MODPY_RUNDEP ?=		Yes
.if ${NO_TEST:L} == "no"
MODPY_TESTDEP ?=	Yes
.else
MODPY_TESTDEP ?=	No
.endif

.if ${MODPY_BUILDDEP:L} == "yes"
BUILD_DEPENDS +=	${_MODPY_BUILD_DEPENDS}
.endif

.if ${MODPY_RUNDEP:L} == "yes"
RUN_DEPENDS +=		${MODPY_RUN_DEPENDS}
.endif

.if ${MODPY_TESTDEP:L} == "yes"
TEST_DEPENDS +=		${MODPY_TEST_DEPENDS}
.endif

_MODPY_PRE_BUILD_STEPS = :

.if ${MODPY_PYBUILD} == No
# not necessarily an error, but try to draw attention to it. defer printing
# the warning to fake-install where it's less likely to scroll off the screen.
_MODPY_PRE_BUILD_STEPS += ; if [ -e ${WRKSRC}/pyproject.toml ] && \
	grep -q ^build-backend ${WRKSRC}/pyproject.toml; then \
	    (echo; echo '*** Ports with pyproject.toml should normally use MODPY_PYBUILD'; \
	        grep -H ^build-backend ${WRKSRC}/pyproject.toml; echo ) >> \
	        ${WRKDIR}/.modpy-warn; \
	fi
.endif

_MODPY_USE_CARGO = No

.if ${MODPY_PYBUILD} != No
BUILD_DEPENDS +=	devel/py-build \
			devel/py-installer
# if adding new backends, update python-module(5)
.  if ${MODPY_PYBUILD} == flit
BUILD_DEPENDS +=	devel/py-flit
.  elif ${MODPY_PYBUILD} == flit_core
BUILD_DEPENDS +=	devel/py-flit_core>=3.11.0
.  elif ${MODPY_PYBUILD} == flit_scm
BUILD_DEPENDS +=	devel/py-flit_scm
.  elif ${MODPY_PYBUILD} == hatch-vcs
BUILD_DEPENDS +=	devel/py-hatch-vcs
_MODPY_EXPECTED_BACKEND = hatchling
.  elif ${MODPY_PYBUILD} == hatchling
BUILD_DEPENDS +=	devel/py-hatchling
.  elif ${MODPY_PYBUILD} == jupyter_packaging
BUILD_DEPENDS +=	devel/py-jupyter_packaging
_MODPY_EXPECTED_BACKEND = setuptools
.  elif ${MODPY_PYBUILD} == maturin
BUILD_DEPENDS +=	devel/maturin
MODCARGO_CARGO_BIN =	maturin
_MODPY_WHEELSDIR =	target/wheels
_MODPY_USE_CARGO =	Yes
.  elif ${MODPY_PYBUILD} == mesonpy
BUILD_DEPENDS +=	devel/meson-python
MODPY_PYBUILD_ARGS +=	--config-setting=setup-args=--wrap-mode=nodownload \
			--config-setting=setup-args=--auto-features=enabled \
			--config-setting=compile-args=-j${MAKE_JOBS} \
			--config-setting=compile-args=-v
# duplicate some settings from meson.port.mk
MAKE_ENV +=		AR="ar" # base installs llvm-ar as ar(1) without a link
.    if !empty(BUILD_DEPENDS) && !${BUILD_DEPENDS:Mdevel/cmake/core*}
# don't allow meson to fallback to cmake to find deps unless listed as a BDEP;
# it may have been junked
_MODPY_PRE_BUILD_STEPS += ; ln -sf /usr/bin/false ${WRKDIR}/bin/cmake
.    endif
.  elif ${MODPY_PYBUILD} == pbr
BUILD_DEPENDS +=	devel/py-pbr \
			py3-setuptools->=79v0:devel/py-setuptools \
			devel/py-wheel
.  elif ${MODPY_PYBUILD} == pdm
BUILD_DEPENDS +=	devel/py-pdm-backend
.  elif ${MODPY_PYBUILD} == poetry-dynamic-versioning
BUILD_DEPENDS +=	devel/py-poetry-dynamic-versioning
_MODPY_EXPECTED_BACKEND = poetry_dynamic_versioning
.  elif ${MODPY_PYBUILD} == poetry-core
BUILD_DEPENDS +=	py3-poetry-core->=2.2.0:devel/py-poetry-core
_MODPY_EXPECTED_BACKEND = poetry.core
.  elif ${MODPY_PYBUILD} == scikit-build-core
BUILD_DEPENDS +=	devel/py-scikit-build-core
_MODPY_EXPECTED_BACKEND = scikit_build_core
MAKE_ENV +=		TMPDIR=${WRKDIR}
.  elif ${MODPY_PYBUILD} == setuptools || \
	${MODPY_PYBUILD} == setuptools_scm || \
	${MODPY_PYBUILD} == setuptools-rust
BUILD_DEPENDS +=	py3-setuptools->=79v0:devel/py-setuptools \
			devel/py-wheel
_MODPY_EXPECTED_BACKEND = setuptools
.    if ${MODPY_PYBUILD} == setuptools_scm
BUILD_DEPENDS +=	devel/py-setuptools_scm
.    elif ${MODPY_PYBUILD} == setuptools-rust
BUILD_DEPENDS +=	devel/py-setuptools-rust
_MODPY_USE_CARGO =	Yes
.    endif
.  elif ${MODPY_PYBUILD} == uv_build
BUILD_DEPENDS +=	devel/uv
.  elif !${MODPY_PYBUILD:Mother}
ERRORS +=		"Fatal: unknown MODPY_PYBUILD value - see python-module(5)"
.  endif
_MODPY_EXPECTED_BACKEND ?= ${MODPY_PYBUILD}
_MODPY_WHEELSDIR ?= dist
.  if ${_MODPY_USE_CARGO} == Yes
ONLY_FOR_ARCHS ?=	${RUST_ARCHS}
MODCARGO_INSTALL ?=	No
MODCARGO_TEST ?=	No
MODULES +=		devel/cargo
.  endif
.endif

.if ${MODPY_PYBUILD:Msetuptools*}
# Disable warning from coherent.licensed if installed when building any
# project that doesn't specify that it's required. "If the target ecosystem
# expects build artifacts to be installed to a shared environment, the
# warning can be disabled"
MAKE_ENV +=		COHERENT_LICENSED_UNUSED_ACTION=ignore
# Setuptools opportunistically picks up plugins. If it picks one up that
# uses finalize_distribution_options (usually setuptools_scm), junking
# that plugin will cause failure at the end of build.
# In the absence of a targetted means of disabling this, use a big hammer:
DPB_PROPERTIES +=	nojunk
# XXX if a "nojunk" port fails to build, DPB will no longer junk on that
# XXX node, likely resulting in running out of disk space in /usr/local.
.endif

# cython picks up pythran at run time in some cases, resulting in
# DPB failure if junking occurs. Set DPB_PROPERTIES to avoid this.
MODPY_CYTHON_PYTHRAN_RDEP ?= Yes
.if defined(BUILD_DEPENDS) && ${BUILD_DEPENDS:Mlang/cython*}
DPB_PROPERTIES +=	nojunk
.endif

.if ${MODPY_PI:L} == "yes"
.  if defined(GH_ACCOUNT)
ERRORS += "both MODPY_PI and GH_ACCOUNT are set"
.  endif
_MODPY_EGG_NAME =	${DISTNAME:S/-${MODPY_DISTV}//}
MODPY_PI_DIR ?=		${DISTNAME:C/^([a-zA-Z0-9]).*/\1/}/${_MODPY_EGG_NAME}
SITES =			${SITE_PYPI:=${MODPY_PI_DIR}/}
HOMEPAGE ?=		https://pypi.org/project/${_MODPY_EGG_NAME}
.endif

MODPY_BIN =		${LOCALBASE}/bin/python${MODPY_VERSION}
MODPY_INCDIR =		${LOCALBASE}/include/python${MODPY_VERSION}
MODPY_LIBDIR =		${LOCALBASE}/lib/python${MODPY_VERSION}
MODPY_SITEPKG =		${MODPY_LIBDIR}/site-packages

# usually setup.py but Setup.py can be found too
MODPY_SETUP ?=		setup.py

# build or build_ext are commonly used
MODPY_DISTUTILS_BUILD ?=	build --build-base=${WRKBUILD}
MODPY_DISTUTILS_INSTALL ?=	install --prefix=${TRUEPREFIX} \
				--root=${DESTDIR}

MAKE_ENV +=		CC=${CC}
CONFIGURE_ENV +=	PYTHON="${MODPY_BIN}"
.if ${CONFIGURE_STYLE:Mgnu}
CONFIGURE_ENV +=	ac_cv_prog_PYTHON="${MODPY_BIN}" \
			ac_cv_path_PYTHON="${MODPY_BIN}"
.endif

_MODPY_RUNBIN =		cd ${MODPY_BUILD_DIR} && ${SETENV} ${MAKE_ENV} ${MODPY_BIN}
MODPY_CMD =		${_MODPY_RUNBIN} ./${MODPY_SETUP} ${MODPY_SETUP_ARGS}

MODPY_TEST_DIR ?=	${WRKSRC}

MODPY_TEST_CMD = cd ${MODPY_TEST_DIR} && ${SETENV} ${ALL_TEST_ENV} ${MODPY_BIN}
.if ${MODPY_PYTEST:L} == "yes"
MODPY_PYTEST_USERARGS ?=
MODPY_TEST_CMD +=	-m pytest ${MODPY_PYTEST_USERARGS}
MODPY_TEST_LIBDIR ?=	${WRKINST}${MODPY_SITEPKG}:${WRKSRC}/build/lib:${WRKSRC}/build/lib.openbsd-${OSREV}-${ARCH}-cpython-${MODPY_MAJORMINOR}:${WRKSRC}/lib.openbsd-${OSREV}-${ARCH}-${MODPY_VERSION}:${WRKSRC}
TEST_ENV +=		PYTEST_DEBUG_TEMPROOT=${WRKDIR}
.endif

MODPY_TEST_LIBDIR ?=
MODPY_TEST_LOCALE ?=	LC_CTYPE=en_US.UTF-8
TEST_ENV +=		${MODPY_TEST_LOCALE}

.if !empty(MODPY_TEST_LIBDIR)
TEST_ENV +=	PYTHONPATH=${MODPY_TEST_LIBDIR}:lib:src
.endif

SUBST_VARS :=	MODPY_PYCACHE MODPY_ABI3SO MODPY_PYC_MAGIC_TAG \
		MODPY_BIN MODPY_DISTV MODPY_VERSION \
		MODPY_PY_PREFIX MODPY_PYOEXTENSION ${SUBST_VARS}

CHECK_LIB_DEPENDS_ARGS += \
	-S MODPY_WANTLIB="${MODPY_WANTLIB}"

UPDATE_PLIST_ARGS += \
	-S MODPY_PYOEXTENSION

# set MODPY_BIN for executable scripts
MODPY_BIN_ADJ =	perl -pi \
		-e '$$. == 1 && s|^.*env +python.*$$|\#!${MODPY_BIN}|;' \
		-e '$$. == 1 && s|^.*bin/python.*$$|\#!${MODPY_BIN}|;' \
		-e 'close ARGV if eof;' --

MODPY_ADJ_FILES ?=
.if !empty(MODPY_ADJ_FILES)
MODPYTHON_pre-configure += cd ${WRKSRC} && ${MODPY_BIN_ADJ} ${MODPY_ADJ_FILES}
.endif

MODPY_COMPILEALL = ${MODPY_BIN} -m compileall -j ${MAKE_JOBS} -s ${WRKINST} -o 0 -o 1

MODPY_TEST_TARGET =
MODPY_TEST_LINK_SO ?=	No
.if ${MODPY_TEST_LINK_SO:L} == "yes" && !empty(MODPY_TEST_LIBDIR)
MODPY_TEST_LINK_SRC ?=	${WRKSRC}
MODPY_TEST_SO_CMD = for _dir in ${MODPY_TEST_LIBDIR:S,:, ,g}; do \
	if [ -d $${_dir} ]; then \
		if [ $${_dir} != ${MODPY_TEST_LINK_SRC} ]; then \
			cd $${_dir} && \
			find . -name '*.so' -type f \
				-exec ln -sf $${_dir}/{} \
					${MODPY_TEST_LINK_SRC}/{} \; ;\
		fi; \
	fi; done
MODPY_TEST_TARGET +=	${MODPY_TEST_SO_CMD};
.endif

.if ${MODPY_PYBUILD} != No
.  if ! ${BUILD_DEPENDS:Mmisc/py-coherent.licensed}
_MODPY_PRE_BUILD_STEPS += ; if [ -e ${WRKSRC}/pyproject.toml ] && \
	(grep -A8 '^requires' ${WRKSRC}/pyproject.toml | \
	grep -q 'coherent.licensed'); then \
	    (echo; echo '*** Port may need BUILD_DEPENDS=misc/py-coherent.licensed'; \
		echo ) >> ${WRKDIR}/.modpy-warn; \
	fi
.  endif
.  if ! ${MODPY_PYBUILD:Msetuptools_scm} && ! ${BUILD_DEPENDS:Mdevel/py-setuptools_scm}
_MODPY_PRE_BUILD_STEPS += ; if [ -e ${WRKSRC}/pyproject.toml ] && \
	(grep -A8 '^requires' ${WRKSRC}/pyproject.toml | \
	grep -q 'setuptools[-_]scm'); then \
	    (echo; echo '*** Port may need MODPY_PYBUILD=setuptools_scm'; \
	        grep -H -e ^build-backend -e '^requires.*setuptools' \
		${WRKSRC}/pyproject.toml; echo ) >> ${WRKDIR}/.modpy-warn; \
	fi
.  endif
.  if ${_MODPY_EXPECTED_BACKEND} != other
_MODPY_PRE_BUILD_STEPS += ; if [ -e ${WRKSRC}/pyproject.toml ] && \
	grep '^build-backend' ${WRKSRC}/pyproject.toml | \
	grep -qvw ${_MODPY_EXPECTED_BACKEND}; then \
	    (echo; echo '*** Check MODPY_PYBUILD setting (currently "${MODPY_PYBUILD}")'; \
	        grep -H ^build-backend ${WRKSRC}/pyproject.toml; echo ) >> \
	        ${WRKDIR}/.modpy-warn; \
	fi
.  endif
MODPY_PYBUILD_ARGS ?=
MODPY_BUILD_TARGET = ${_MODPY_PRE_BUILD_STEPS}; \
	${_MODPY_RUNBIN} -sBm build -w --no-isolation ${MODPY_PYBUILD_ARGS}
MODPY_INSTALL_TARGET = \
	${INSTALL_DATA_DIR} ${WRKINST}${MODPY_LIBDIR}; \
	${_MODPY_RUNBIN} -m installer -d ${WRKINST} ${MODPY_BUILD_DIR}/${_MODPY_WHEELSDIR}/*.whl
MODPY_TEST_TARGET +=	${MODPY_TEST_CMD}
.  if ${MODPY_PYTEST:L} == "yes"
MODPY_TEST_TARGET +=	${MODPY_PYTEST_ARGS}
.  endif
.else
MODPY_BUILD_TARGET = ${_MODPY_PRE_BUILD_STEPS}; \
	${MODPY_CMD} ${MODPY_DISTUTILS_BUILD} ${MODPY_DISTUTILS_BUILDARGS}
MODPY_INSTALL_TARGET = \
	${MODPY_CMD} ${MODPY_DISTUTILS_BUILD} ${MODPY_DISTUTILS_BUILDARGS} \
		${MODPY_DISTUTILS_INSTALL} ${MODPY_DISTUTILS_INSTALLARGS}

MODPY_TEST_TARGET +=	${MODPY_TEST_CMD}
.  if ${MODPY_PYTEST:L} == "yes"
MODPY_TEST_TARGET +=	${MODPY_PYTEST_ARGS}
.  endif
.endif

MODPY_INSTALL_TARGET += ; if [ -r ${WRKDIR}/.modpy-warn ]; then cat ${WRKDIR}/.modpy-warn; fi

.if ${MODPY_PYBUILD} != No && ${_MODPY_ADD_TARGETS} == Yes
.  if !target(do-configure) && ${_MODPY_USE_CARGO} == Yes
do-configure:
	@${MODCARGO_configure}
.  endif

.  if !target(do-build)
do-build:
.    if ${_MODPY_USE_CARGO} == Yes
	@${MODCARGO_BUILD_TARGET}
.    endif
.    if ${MODPY_PYBUILD} != maturin
	@${MODPY_BUILD_TARGET}
.    endif
.  endif

# extra documentation or scripts should be installed via post-install
.  if !target(do-install)
do-install:
	@${MODPY_INSTALL_TARGET}
.  endif
.endif

.if !target(do-test) && ${MODPY_PYTEST:L} == "yes"
do-test:
	@${MODPY_TEST_TARGET}
.endif